Restate Health
Certificate of Analysis
Prostamax 10 mg
- Certificate status
- On file
- Lot status
- Current lot
02Product identity
- Product
- Prostamax
- Strength
- 10 mg
- Lot
- PROS20-0318
- Certificate ID
- COA3398
03Test results
Overall purity
99.9%
RP-HPLC (214 nm)
Conforms as reported by the laboratory
- Sample received
- 26 Mar 2026
- Certificate issued
- 3 Apr 2026
- IdentityProstamaxMALDI-MSConforms
- Content12.82 mgMass Spectrum (MALDI-MS)Conforms
- Overall Purity99.9%RP-HPLC (214 nm)Conforms
- Endotoxin≤0.05 EU/mLPass
- Sample as tested
- Prostamax 10mg, white lyophilized powder
- Molecular weight
- 487.5 g/mol
04Reading this certificate
This certificate covers one lot. It documents lot PROS20-0318 and no other. Before relying on it, check that the lot number printed on your vial label matches it character for character. A vial from a different lot has its own certificate.
What 99.9% means. Overall purity is measured by reverse-phase HPLC with detection at 214 nm. The figure is the share of the detected signal that belongs to the compound itself; the remainder is everything else the method detected in the sample.
Identity and content are separate checks. Identity was confirmed by MALDI-MS, which compares the measured mass with the mass expected for the compound. Content is the quantity found in the vial, reported in milligrams, and is why a vial can read slightly above its label strength.
The laboratory record is the source. The values on this page are transcribed from the laboratory’s certificate without change. The original document and the laboratory’s own verification code are listed below.
05Source documentation
- Testing laboratory
- Bioviridian Inc.
- Shane Straight, M.S., Principal Chemist
- Testing provenance
- This product is supplied to Restate Health by American Peptides. The laboratory tested the lot for American Peptides, which is the vendor named on the original record. Restate Health did not perform or commission this test and presents the results as the laboratory reported them.
- Lot reference
- The lot number is the one assigned by the source manufacturer and printed on the laboratory record (shown there as the batch number).
- Notes on this record
- The sample name printed on the laboratory record reads "Prostamax 10mg"; the source library lists this lot under 20 mg. The strength shown here is the one printed on the record.
06Research use only
This material is supplied for laboratory research use only. It is not for human or veterinary use. A certificate of analysis describes the composition of a lot; it is not a statement about any use of the material.
For laboratory research use only. Not for human or veterinary use.